Okay, cpuz...here are the results
CPU-Z Report
CPU-Z version 1.33.1.
CPU(s)
Number of CPUs 1
Name AMD Athlon XP
Code Name Palomino
Specification AMD Athlon(tm) XP 1700+
Family / Model / Stepping 6 6 2
Extended Family / Model 7 6
Package Socket A
Core Stepping A5
Technology 0.18 um
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1460.8 MHz
Clock multiplier x 11.0
Front Side Bus Frequency 132.8 MHz
Bus Speed 265.6 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1460.8 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Mainboard and chipset
Motherboard manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Motherboard model MS-6330,
BIOS vendor Award Software International, Inc.
BIOS revision 6.00 PG
BIOS release date 12/19/2001
Chipset VIA KT133A rev. 03
Southbridge VIA VT82C686 rev. 40
Sensor chip VIA 686A/B
Graphic Interface AGP
AGP Status enabled, rev. 3.0
AGP Data Transfer Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing supported, enabled
Memory
DRAM Type SDRAM
DRAM Size 512 MBytes
DRAM Frequency 132.8 MHz
FSB:DRAM 1:1
DRAM Interleave 4-way
CAS# Latency 3.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
# of memory modules 2
Module 0 SDRAM PC133 - 256 MBytes
Module 1 SDRAM PC133 - 256 MBytes
Software
Windows version Microsoft Windows XP Professional Service Pack 1 (Build 2600)
DirectX version 9.0c
Power supply is practically new, 400. motherboard is old...still uses DIMM PC 133.
The problem with SP2 is I still have systems in my LAN that use Windows 98.......not 98SE......
The ram I have is correct according to the manual for my motherboard.....
I will try and remove a stick of ram and see what happens.......
Thanks....any help is appreciated....
Amberyl