More Awesome Than You!

The monitor is my old monitor (the new PC didn't come with one), and the monitor has been tested to work using my old PC and as a second screen for my Linux laptop. I've also tested it with a second monitor, still no dice. I have checked, and the monitors were connected to the correct port.

Try plugging it into the incorrect port.

Tried that as well.

Remove new video card, plug into onboard port, and check BIOS settings?

I have no idea how to even open the case on this thing (I'm used to there being a series of screws on the back which allow the side panel to be removed. This case doesn't have those, so I have no idea how the side panels are being held on in the first place), which is kind of a prerequisite to the above. I've hired someone to take a look at it tomorrow, so this means that I will either end up paying massive amounts in tech support and replacement fees, or I will end up sending it back to the manufacturer at reduced tech support costs, but higher delivery costs.

I have no brilliant suggestion, especially given that I am not used to screwfree panels either. However, I feel your pain, as I took my spifftop in for more memory and it decided to pretend to have a RAID 0 disk failure it didn't really have, and the expletive deleted tech decided to remove all my programs to a backup hard drive without clearing it with me first. And then wouldn't put them back. ANd I've moved 3-4 times since buying the original programs, so I now have to cadge a copy of Photoshop and Illustrator. Already paid for them twice, once per OS, and am not doing it again.

Stupid lying computer, stupid data borking geek. I was highly displeased. He'll have some trouble getting those scorch marks to wask off.

I see those as being like Chinese puzzle boxes, where half the fun is figuring out how to open it yourself!

Venusy, what brand and model?  The manuals are generally available online and they give the directions on how to crack the box.  We could do that and post the instructions.

Usually the newer cases, you have to rip their faces off first before you can get to the takey-apart bits. Got caught several times myself, turning a box over and over hopelessly looking for an in.

MAXDATA Favorit 1000. I do have the manual on CD (a very interesting read, half the pages are based on how the wireless card is illegal to use on aeroplanes, and how the warranty is void if you "install" any viruses or alternate OSs that break something, and the rest is mostly obvious things like "where to insert the PS/2 plugs" and contains nothing on how to actually open the case). The troubleshooting section has this to say on the subject of monitors not displaying a picture:
(It isn't)
(Yes, it is)
(Yes, it is)
(Irrelevant, due to the fact that the monitor displays "NO INPUT SIGNAL" on it)

Are you sure it's not just a refresh rate problem? Some older monitors just won't display higher refresh rates. Do you have access to a more modern monitor? If you can hook your computer up to a more modern monitor and it works, then crank the refresh rate back down.

Use a hammer.

(http://imgred.com/http://www.gamezworld.de/phpforum/style_emoticons/default/gw_smiley_hammer.gif)


Ste

Have you tried getting into safe mode?  It's possible it might work in there if it's a driver/refresh problem, maybe.

*ETA* I'm assuming of course that you do get to see a boot screen and it's just not working in the operating system.

If you are getting the "No Input Signal" message on your monitor then its one of these problems:

1. Monitor Doesn't work
2. Monitor plugged into wrong port
3. Bad video card or video card is loose in its socket
4. The video slot on the motherboard is bad

As far as the stupid manual that you received with your computer, it is usually not the manual but rather just a minimum info sheet to get the average person who doesn't like to read to be able to operate the computer. Put your PC name and model number into a search engine. Most places have an actual manual online that will tell you how to open the case, what your Bios settings mean, etc.

I repair computers for a living and there have been a small handful of brands that I have had to look up online just to open the stupid case. If you do manage to get the case open, you can remove then reseat the video card and see if that helps.

If you have another video card that you can put in to test, so much the better. If another video card works, then you have narrowed the problem down to a bad video card.


They mean that if you have the type of monitor that has buttons on it to change the brightness settings, then make sure that it is turned up bright enough to see a picture. Sometimes buttons can get pushed when moving the monitor around. But this isn't your problem or you wouldn't be able to see the "no signal" message.

I don't get to see a boot screen.
So far, I've confirmed it isn't 1 or 2.

MAXDATA don't have manuals online: they have a shop where you can buy a physical copy of the manual. At €8 plus shipping. And I have a fear that this is just a hard copy of the one that came with the computer.

Madame Mim, I should've made myself more clear: the "old monitor" is a 2004 GNR model, and supports everything from 60Hz to 90Hz (I think) as long as it's at 1024x768. I don't think it would have turned up a no input signal error if it was a resolution or refresh rate problem.

Until the tech arrives, Syberspunk's suggestion may be the best suggestion. But it would probably void the warranty, which wouldn't be a good idea if the technician can't fix it and I have to send it back...

No, if it's a resolution/refresh problem, it WILL turn up as no signal. I've had it happen. I didn't even know it was possible until it happened, but luckily I knew exactly what the problem was as I'd just increased my refresh rate.

Ebuyer are collecting the computer, and dropping off a new one tomorrow, which should fix the problem. Or persuade me to purchase a new monitor (if the new new PC is also broken).

And katenigma, I hadn't realized that. These monitors normally display a different error message for resolution issues ("resolution range exceeded" or an equivalent), so I assumed it would be similar if the refresh rate range was exceeded.

Resolution/refresh won't happen until you get past the BIOS prompt. If it dies once Windoze gets to loading, THEN you have a refresh problem. If it dies before you get even to the DOS prompt area, something else is wrong.